When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.Â
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.Â
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
