Flushing through a Tritech T4
Check out part 3 in the series which shows you how to flush through all the packing oils and agents out of your shiny new Tritech T4 spray machine.
Spraying Make Sense
Tritech support Directory
Information to make a difference
Information to make a difference
Unboxing a Tritech T4
Not sure where to start once you have got your new machine? Well this is the best place!
Check out part 1 in the series which shows you what’s in the box and how to put together your shiny new Tritech T4 spray machine.
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
Setting up a Tritech T4
Check out part 2 in the series which shows you how to put together your shiny new Tritech T4 spray machine.
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
Liams best results and set up with Akvi Primer
Do you Want to know what the best Set up is for Spraying Tikkurilla Akvi Primer and how to get the best results ?
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
Lift the lid with Renner 641 – Transform your kitchen today
Check out this latest video about Renner 641 Primer on a kitchen re-spray with Ian at PaintTech Decorators. Find out what their tips & tricks are to get that great finish.
Liam gets an awesome finish with Renner 760
Do you want to find out what set up and pressure liam is spraying Renner 760 top coat at to get an absolutely awesome finish on his kitchen?
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
Tritech T5
Here are all the videos related to the Tritech T5
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
Tips & Tricks from Rhys on using Tikkurila Nova 2
Are you spraying ceilings or walls with Nova 2 and want to find out the best tip and pressure to spray at?
Then why not take a look at this video from Rhys
The Ginger Viking getting the best results on Isomat Premium Colour
Do you Want to know what the best Set up is for Spraying Isomat Premium Colour and how to get the best results?
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
Setting up a Tritech T5
Have you purchased a Tritech T5 sprayer but not sure how to set it all up to use it? Check out this video which gives you a step by step guide of what to do and what you need to get started.
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
Liams great coverage with Renner 643
Do you Want to know what the best Set up is for Spraying Renner 643 primer and how to get the best results ?
Then check out the latest video from Liam
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
Unboxing a Tritech T5 – what’s in the box?
Are you looking at getting a Tritech T5 sprayer but not sure what comes with the machine? Check out this video which gives you a great idea 🙂
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
Rhys showing his set up for spraying Renner 760 on a kitchen
Want to find out what machine, tip and pressure that Rhys is using on a kitchen project then watch this video and see what he thinks of it.
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
Tritech T7
Here are all the videos related to the Tritech T7
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
Unboxing a Tritech T7 – what’s in the box?
Are you looking at getting a Tritech machine but not sure what comes with the machine? Check out this video which gives you a great idea 🙂
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
Setting up a Tritech T7
Have you purchased a Tritech T7 sprayer but not sure how to set it all up to use it? Check out this video which gives you a step by step guide of what to do and what you need to get started.
Tritech T8
Here are all the videos related to the Tritech T8
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
Review of the Tritech T8 spray machine
Are you thinking of buying a Tritech sprayer but not sure which one? Have a look through some of the reviews of the different machines on Spraying Makes Sense before you make up your mind.
This video runs through a few of the benefits of the Tritech T8 that Ian can see.
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
Tritech T9
Here are all the videos related to the Tritech T9
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
Tritech T11
Here are all the videos related to the Tritech T11
Getting to the hopper filter in a Tritech sprayer
This is a great top tip if you need to get to the filter in a Tritech hopper out. It’s not the easiest to get it out especially when it is full of paint.
How to add a hopper to a Tritech spray machine
Do you have a Tritech sprayer and are looking to add a hopper to it? It’s really easy to add the hopper to an existing machine and in this video we show you how to swap over the suction hose for the hopper in a matter of minutes..
HOW TO: Prime you Tritech Spray Machine with Paint
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
HOW TO: Add the tip and guard and start spraying
So if you have watch the other videos you should have the machine set up, the packing oils flushed and ready to spray paint.
In this video we talk you through how to add the tip and guard, a few tips on technique to get you started and the important of wearing a mask.
HOW TO: Change gun filters on a Tritech T360 gun
Filtration is so important when spraying so knowing how to change the filters is essential. In this video we walk you through exactly that using a Tritech T360 airless spray gun.
HOW TO: Clean/Flush your Tritech spray machine of paint
This video shows how to clean the machine out of the paint you have been using in a really quick and efficient way. Now this could be at the end of the day if you are heading to another project or if you are flushing from one colour or type of paint to another.
We also show you how to clean the manifold and gun filters.
How to locate your serial number on your Tritech sprayer
When your machine needs to come in for repair whether its under warranty or not you will need to know the serial number of it.
Over the years this may well get covered in paint so its probably a good idea to make a note of it before that happens 😉
Changing the prime valve on a Tritech sprayer
We had a problem with our prime valve on the Tritech T5 so we videoed changing it for a new one. Turns out it probably just needed a good clean so worth baring in mind if the same happens to you.
TriTech T360 gun – How to change the filter
Need a little help with changing your inline filter? Are you changing your filter correctly? Why is my gun leaking after changing the filter?… All these questions can be answered by watching this simple and quick video from Ian.
Flushing your Tritech machine ready to spray
Have you got a new Tritech machine but not sure where to start? Run through each of the videos we have on Spraying Makes Sense and they will help you get started.
This video shows you how to flush through all the packing oils before you add paint to the machine.
HOW TO: Change a manifold filter on a Tritech airless spray machine
In this video, we show you how to change the manifold filter on a TriTech machine. The same process applies to all Tritech machines so this is a great video to watch if you’re working with airless spray paint machines.
Adding paint to a Tritech machine
Have you got a new Tritech machine but not sure where to start? These videos are a great and will make life so much easier. Start with the unboxing video, then check out the one putting it together, finally watch this one to get you set up ready to spray paint.
Adding a tip seat to a Tritech tip guard
This video shows the easiest way to get the tip seat into a Tritech tip guard. We don’t change them that often so once its in then you won’t have to do it again for a while!
I have a Tritech spray machine addiction
After spraying for over 30 years I think it’s safe I love my machines! I have built quite a collection over the years and Tritech are one of my most used spray machines. I have since added a Tritech T7, T9 and T11 since this video was filmed. Clearly, I can’t get it under control!
Tritech Reviews
Here are all the review videos from others who have Tritech machines.
Tritech T5 review from Paris of Overall Decorating
In this video Paris of Overall Decorating runs through her Tritech T5 carry cart, why she bought it and what she loves about it.
Tritech T4 review from Trevor
In this video Trevor McMillan of TM Decor runs through his Tritech T4 carry cart, why he bought it and what he loves about it.
Tritech T7 review from Dermot in Ireland
In this video Dermot O’Kelly of Bespoke Spraying Solutions runs through his Tritech T7 carry cart, why he bought it and what he loves about it.
He also runs through the support that he got from SMS Spray Supplies.
Check out our reviews on the Spraying Makes Sense page before you make up your mind.
Tritech T9 review from Nathan in Scotland
In this video Nathan Cumming of Endeco runs through his Tritech T9, why he bought it and what he loves about it.
Review of the Tritech T8 spray machine
Are you thinking of buying a Tritech sprayer but not sure which one? Have a look through some of the reviews of the different machines on Spraying Makes Sense before you make up your mind.
This video runs through a few of the benefits of the Tritech T8 that Ian can see.
Welcome to our spraying Community
Join our fast growing online community with over 12,000 members
discussing the power of Spraying and all things Decorating
What you'll get from Spraying Makes Sense Website
We want to provide anybody that visits this website with relevant information on how to start and/or improve their decorating business through knowhow information, best tools and techniques and industry reports from influencers. We also want to provide people with the latest information and knowhow on marketing/business growth tips and tools to help decorators be better at growing their business. We add information that we deem to be relevant and right for the audience, we, of course, can not guarantee the authenticness and accuracy of the information.
• Spraying makes sense offers advice and guidance to decorators from companies that provide services and tools to those we speak to. We do not monitor everything that the company we promote do but we aim to provide honest and truthful advice.
• We provide information that we have applied to our business or the business that we work with that we believe will have an impact on your business. We can not take responsibility for the results you achieve as how you apply the information we apply is just as important as the information we give.