See lots of Top Tips and Tricks we have learnt over the years to save you loads of Time and tons of Money
Spraying MDF doesn’t have to be hard. This MDF primer from Anker Stuy can be applied by all types of equipment, including conventional gravity-fed pot guns, HVLP, and airless and air-assisted pumps. In this video we test the Ankocryl Interior Filling Primer for things like durability, flexibility, sanding, and any anti-tanning properties it may or may not have.
This is a video that we have put out on here quite a few times but surprisingly its something that a lot of people struggle with. For us the cleanshot is so much more than the anti spit device that its meant to be but this video is all about getting the cleanshot to work at the lower pressures.
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
Find out loads of information about all the machines available in the market that you can use to benefit your business
There are a few versions in the T-Max series and we are sure that they will be increasing in numbers throughout the UK market very quickly over the next few years. The machines often used for plaster in the uk are being used to their maximum and don’t have the same longevity as a machine like the T-Max which is working much less to achieve the same result. This means that they will last a lot longer and need less maintenance.
So you have a Tritech spray machine, its all unboxed and set up, you have cleaned out all of the packing oils that it came with and you are ready to get started with painting.
This video shows you how to set up the machine, remove the water and switch over to paint in the machine and paint in the hose. Next all you have to do is choose the tip you want to use..
Check out part 3 in the series which shows you how to flush through all the packing oils and agents out of your shiny new Tritech T4 spray machine.
There is loads of information here about different products you an use within your business to get great finishes both on and off site.
This week Rhys is lifting the lid on a Johnstones Aqua Guard. This is Johnstones top range woodwork paint in a satin finish perfect some spraying these built in panels in a living room.
Looking for that perfect primer or undercoat? We’re back again with this lift the lid video on this fantastic product Caparol.
Are you looking for that silky satin finish? Something that will withstand those high traffic areas, interior or exterior?
Then take a look at this lift the lid video with Ian on Caparol PU-Satin.
This area will be all about everything else thats not been mentioned above. This could be accessories you can add, tips or things to make life easier
Each week on Spraying Makes Sense Live we run a spotlight on anything spray-related. This week in the spotlight was the 3M PPS system. Ian talks about the 170ml mini cups which were a typical internet purchase! From the photo, he was sure these were the standard 650ml cups but when they turned up he realised his mistake lol. However, he has since found that they are perfect for his kitchen sample boards as they hold a small amount of paint.
We were really lucky to get a full set of the smoothing blades sent from Graco for us to have a play with which was awesome. We will be playing with these more on site and on training courses so keep your eyes and ears peeled!
We run through all the sizes of skimming blades that are available along with the spats/joint knives in this video but there are a couple of sets that you can buy with the brilliant carry case from most UK distributors.
Want to know how to select the right filter for your job or spray setup? or stop those tip blockages?
